Model: EK-FC1080 GTX 1080 Strix ROG Asus - Nickel VGA Block
Tình trạng: Mới 100%
Xuất xứ: Chính Hãng
Kho hàng: Có hàng sẵn
EK-FC1080 GTX Strix is a high performance full-cover water block for ASUS® design GeForce® GTX 1080, 1070 and 1060 Strix series graphics cards.
Connect a pre-filled GPU water block to your EK-XLC Predator with QDC!
This Full-Cover GPU water block can be pre-filled and equipped with Quick Disconnnect (QDC) for connecting to the existing QDC found on the EK-XLC Predator.
EK-FC1080 GTX Strix is a high-performance full-cover water block for ASUS® ROG Strix GeForce® GTX 1080, 1070 and 1060 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!
This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1080 GTX Strix water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.
The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M2,5x4 AX1 screws and washers.
EKWB recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX Strix Backplate - Black or Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.
G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Strix water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.
We recommend EK-Cable PWM Fan Adapter for GPU for connecting your GPU to PWM-enabled fans in your custom loop and thus controlling the PWM profiles based on the graphics card temperature.
- EK-FC1080 GTX Strix water block
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts and washers
- 2x EK plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)
Made in Slovenia - Europe!
|Material / Design / Color option||Nickel Acetal|
|Prepared for LED Diode||3mm|
|Chip Manufacturer||Nvidia GeForce|
Sản phẩm khác