EK Full Block Nickel-Acetal For AMD HD7990

Giá Tân Doanh: 5,650,000
  • Tình trạng: Mới 100%
  • Xuất xứ: Chính hãng
Hỗ trợ mua hàng
Hotline: 1900 966 939 / 093 889 9941
(Bán hàng cả Thứ Bảy và Chủ Nhật)
  • Giao hàng
    Giao hàng

    Miễn phí giao hàng trong nội thành TP.HCM bán kính 12km với hoá đơn trên 500.000đ.

  • Đổi trả
    Đổi trả

    Đổi mới sản phẩm trong 7 ngày nếu lỗi từ nhà sản xuất. Xem thêm tại đây

  • THANH TOÁN
    THANH TOÁN

Thông tin Sản Phẩm

EK-FC7990 is a high performance full-cover water block engineered specifically for PowerColor/VTX3D/Club3D Radeon HD 7990 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools both GPUs, RAM as well as both VRMs (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it’s VRM to remain stable under high overclocks. EK-FC7990 water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.

Base is made of nickel plated electrolytic copper while the top is made of quality POM acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

EK also encloses the EK-FC7990 Backplate made of high precision CNC milled aluminium with black anodized finish. This backplate directly cools the memory IC on the backside of the circuit board as well as serves as an aesthetic add-on.

Two-slot I/O bracket which replaces the original three-slot, in order to make installation of mutliple graphics cards easier, is also enclosed.

Up to four EK-FC7990 water blocks can be interconnected using EK-FC Terminal system or other methods of interconnectivity. This water block does not align with any other FC water block. This water block is not compatible with EK-FC Bridge CSQ series interconnect!

Enclosed:
– EK-FC7990 series water block
– EK-FC7990 Backplate – Black
– mounting mechanism with screw-in brass standoffs
– thermal pads

Please note: Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance.

Made in Slovenia – Europe!

CAUTION:
– Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site.

Additional Information

End of life No
Option Nickel Acetal
Threads G1/4
Chip Manufacturer AMD Radeon

 

Sản Phẩm Đã Xem

Review EK Full Block Nickel-Acetal For AMD HD7990

5 0% | 0 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá EK Full Block Nickel-Acetal For AMD HD7990
Gửi ảnh thực tế
0 ký tự (Tối thiểu 10)
    +

    Lưu ý: để đánh giá được phê duyệt, vui lòng tham khảo Chính sách Bảo Mật

    Chưa có đánh giá nào.

    Hỏi đáp

    Chưa có bình luận nào

    Vui lòng điền vào ô thông tin bên dưới
    và Chúng tôi sẽ gọi điện cho bạn

    Bảng thông tin Yêu Cầu Gọi Lại!

    Liên hệ